Pegasus stocks more than 1,000 different silicone hose part numbers!
 
 
 
Check us out on Instagram
 
Shop With Confidence - 30 Day Easy Returns - No Need To Call
 
Follow us on facebook
 

Apex Universal Joint, 1 1/4" Bore, MS-20271-B24

On Sale! Save $100
Click for a larger picture of Apex Universal Joint, 1 1/4" Bore, MS-20271-B24
Regularly $279.99 - Now only $179.99 - You save $100!

Due to a cancelled special order we're overstocked on this size Apex joint. Therefore, we're offering a deeply discounted price.

These high-quality, heavy-duty universal joints are manufactured to Military Specification MS-20271. Their strong yet compact, thin wall construction allows them to fit into those tight spots commonly found on shift linkages of mid-engine cars.

Each joint is permanently lubricated and covered with a silicone rubber boot to exclude dirt. They are designed for cross-bolting, pinning, or welding to a close fitting shaft or torque tube. (Welding must be done carefully to prevent heat damage.*) Maximum operation angle 30°.

Beware of counterfeits! Pegasus has been a factory-direct distributor of Apex joints for over 30 years. We only sell brand-new, Genuine Apex brand MS 271 series universal joints - not unreliable foreign knock-offs sold elsewhere. Apex MS 271 joints are made in the USA and tested to meet or exceed Mil Spec MIL-J-6193 and MS20271 standards.

Part Numbering Note:
⁃ Our part numbers refer to the Inside Diameter (ID) of the joint sleeve (OD of the linkage rod or tube).
⁃ The MS dash numbers (-B6 through -B24) refer to the Outside Diameter (OD) of the joint sleeve in sixteenths of an inch.
For example, the B12 size has a 3/4" OD but a 5/8" ID, so it is our part number 1490-5/8. (This size fits the shift finger on Hewland Mk-series and LD200 gearboxes.)

Stepped sizes are not available. If two different diameter tubes must be joined, a bushing must be added to the smaller one. Sold individually.

Apex Covered Universal Joint Dimensions
Bore Size
(ID)
MS Part No. Overall
Length
Sleeve OD Bore
Depth
Static Torque Rating
(Inch-Pounds)
Weight (oz) Part No.
1 1/4" MS20271‑B24 5 1/4"1 1/2"1 5/16"14,500 in-lb 18 1490‑1 1/4


*If you plan to weld these joints, you need our Anti-Heat° Heat Sink Compound to protect the joint and boot from welding heat.

Qty
Part No.
Price
Stock Status
CL1490-1 1/4
$179.99
In Stock